EK®, the leading computer cooling solutions provider, is launching three products designed to light up your PC case. The EK-Loop D-RGB LED Magnetic Strip (600mm) – a stand-alone 600mm long D-RGB LED strip, EK-Loop D-RGB LED Magnetic Kit (4pcs 400mm) – a set of 4 magnetic D-RGB LED strips that can be daisy-chained, and EK-Loop D-RGB LED Edge Diffused Strip (500mm) – White – a specialized LED strip that has a side-illumination going through a diffuser. Choose from 16 million colors via your D-RGB software and make your PC shine in a new light.

EK-Loop D-RGB LED Magnetic Strip (600mm)
This LED strip connects to a PC motherboard or a D-RGB controller via a standard 3-pin 5V connector (+5V, Data, Blocked, Ground). It has a density of 54LEDs/m with a total of 33 separately controllable LEDs on its 600mm long strip. The primary form of mounting it on a PC case is via magnets, but it also has a secondary option, an adhesive tape that can stick to any flat surface. It’s utilized by removing the protective foil from the back of the strip. The strip is encased in a high-quality silicone housing which improves light uniformity and protects the strip.

EK-Loop D-RGB LED Magnetic Kit (4pcs 400mm)
This LED kit connects to a PC motherboard or a D-RGB controller via a standard 3-pin 5V connector (+5V, Data, Blocked, Ground). It has a density of 51LEDs/m with a total of 21 separately controllable LEDs on each of its four 400mm long strips. These strips can be daisy-chained, which means you can connect multiple LED strips for an extra-long lighting solution. The strips in the kit are connected between themselves via JST-SM connectors. The primary form of mounting it on a PC case is via magnets, but it also has a secondary option, an adhesive tape that can stick to any flat surface. It’s utilized by removing the protective foil from the back of the strip. The strips are encased in a high-quality silicone housing which improves light uniformity and protects them.

EK-Loop D-RGB LED Edge Diffused Strip (500mm) – White
This LED Strip has a side-illumination going through a diffuser. It can be utilized for more focused applications when you wish illumination on a specific location and as a detail light. It uses addressable RGB diodes, allowing full control of each diode separately.

It connects to a PC motherboard or a D-RGB controller via a standard 3-pin 5V connector (+5V, Data, Blocked, Ground). Mounting is achieved via an adhesive double-sided tape.

D-RGB Lighting Control
The EK-Loop D-RGB LED Magnetic products are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector must be aligned with the +5V marking on the D-RGB (addressable) header.

Availability and Pricing
The EK-Loop D-RGB LED Strip and the EK-Loop D-RGB LED Kit are made in China and are available for order through the EK Webshop and Partner Reseller Network.